Research

Paper

TESTING March 25, 2026

Can hot water discharged from industrial processes enhance the likelihood of waterspouts?

Authors

Valerio Capecchi, Bernardo Gozzini, Mario Marcello Miglietta

Abstract

Italy and the surrounding seas are recognised as one of the European hotspots for tornadoes and waterspouts. In recent years, the town of Rosignano Solvay (on the Northern Tyrrhenian coast) experienced repeated waterspouts affecting the same areas, raising local concern about the possible influence of heated wastewater discharged into the sea by a nearby industrial site. We reconstruct the mesoscale meteorological conditions of four intense waterspouts near Rosignano Solvay using a limited-area weather model at high-to-very-high resolution (inner domain grid spacing 500 m; sensitivity tests at 100 m). At the reported event times, the intensity of key mesoscale precursors (low-level wind shear, 1 km storm-relative helicity, maximum updraft intensity, and lifting condensation level) is consistent with the values typically associated with EF1 (or stronger) tornadoes and waterspouts. The model systematically predicts the peak of instability indices 2-3 hours earlier than the reported event times. For one case study, we conduct two sea surface temperature sensitivity experiments to assess the potential atmospheric impact of heated wastewater discharge (temperature increases of +1.5 K and +5 K over a 10 km$^2$ area). The resulting changes in instability indices are marginal, with differences of at most 3\% relative to the control run. A simple mass-balance estimate for the modified sea patch suggests that, given the reported discharge rates, a plausible impact of the warm water released from the industrial site could lead to an increase in the local sea surface temperature of approximately +0.7 °C over two months. We conclude that synoptic and mesoscale conditions primarily govern waterspout initiation in this region, while the direct effect of the small, warm coastal plume from the industrial discharge appears to be minor.

Metadata

arXiv ID: 2603.24233
Provider: ARXIV
Primary Category: physics.ao-ph
Published: 2026-03-25
Fetched: 2026-03-26 06:02

Related papers

Raw Data (Debug)
{
  "raw_xml": "<entry>\n    <id>http://arxiv.org/abs/2603.24233v1</id>\n    <title>Can hot water discharged from industrial processes enhance the likelihood of waterspouts?</title>\n    <updated>2026-03-25T12:13:51Z</updated>\n    <link href='https://arxiv.org/abs/2603.24233v1' rel='alternate' type='text/html'/>\n    <link href='https://arxiv.org/pdf/2603.24233v1' rel='related' title='pdf' type='application/pdf'/>\n    <summary>Italy and the surrounding seas are recognised as one of the European hotspots for tornadoes and waterspouts. In recent years, the town of Rosignano Solvay (on the Northern Tyrrhenian coast) experienced repeated waterspouts affecting the same areas, raising local concern about the possible influence of heated wastewater discharged into the sea by a nearby industrial site. We reconstruct the mesoscale meteorological conditions of four intense waterspouts near Rosignano Solvay using a limited-area weather model at high-to-very-high resolution (inner domain grid spacing 500 m; sensitivity tests at 100 m). At the reported event times, the intensity of key mesoscale precursors (low-level wind shear, 1 km storm-relative helicity, maximum updraft intensity, and lifting condensation level) is consistent with the values typically associated with EF1 (or stronger) tornadoes and waterspouts. The model systematically predicts the peak of instability indices 2-3 hours earlier than the reported event times. For one case study, we conduct two sea surface temperature sensitivity experiments to assess the potential atmospheric impact of heated wastewater discharge (temperature increases of +1.5 K and +5 K over a 10 km$^2$ area). The resulting changes in instability indices are marginal, with differences of at most 3\\% relative to the control run. A simple mass-balance estimate for the modified sea patch suggests that, given the reported discharge rates, a plausible impact of the warm water released from the industrial site could lead to an increase in the local sea surface temperature of approximately +0.7 °C over two months. We conclude that synoptic and mesoscale conditions primarily govern waterspout initiation in this region, while the direct effect of the small, warm coastal plume from the industrial discharge appears to be minor.</summary>\n    <category scheme='http://arxiv.org/schemas/atom' term='physics.ao-ph'/>\n    <published>2026-03-25T12:13:51Z</published>\n    <arxiv:primary_category term='physics.ao-ph'/>\n    <author>\n      <name>Valerio Capecchi</name>\n    </author>\n    <author>\n      <name>Bernardo Gozzini</name>\n    </author>\n    <author>\n      <name>Mario Marcello Miglietta</name>\n    </author>\n  </entry>"
}